FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Highlander XU70 (2020-Present) has a transmission error, what should I do? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/my Toyota Highlander XU70 (2020-Present) has a transmission error, what should I do?

my Toyota Highlander XU70 (2020-Present) has a transmission error, what should I do?

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission errors in Toyota Highlander XU70 (2020-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission pan to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Slipping or delayed shifting
  • •Unusual noises when in gear (grinding or whining)
  • •Fluid leakage under the vehicle
  • •Transmission overheating warning
  • •Poor acceleration or loss of power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Funnel
  • •Fluid container

Parts Required

  • •Transmission fluid (Toyota ATF WS)
  • •Transmission filter
  • •Transmission pan gasket
  • •Transmission solenoids (if faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Disconnect the battery to avoid electrical shorts during repairs.
2. Fluid Change

  • Drain Transmission Fluid:

    • Locate the transmission drain plug, typically found on the bottom of the transmission pan.
    • Use a socket set to remove the drain plug and allow fluid to fully drain into a suitable container.

  • Replace Transmission Filter:

    • Remove the transmission pan by unscrewing the bolts with a socket wrench.
    • Carefully take off the pan and replace the filter located inside the transmission.
    • Clean the gasket surface on the pan and replace the gasket if necessary.

  • Refill Transmission Fluid:

    • Reinstall the transmission pan and torque the bolts to the manufacturer's specifications (usually around 8-10 ft-lbs).
    • Refill the transmission with the recommended fluid type (typically Toyota ATF WS) through the dipstick tube or designated fill port using a funnel.
    • Start the engine and shift through all gears to circulate the new fluid, then check fluid level again and add as needed.
3. Electrical Repairs (if applicable)

  • Repair or Replace Wiring:

    • Identify any damaged wiring or connectors in the transmission harness.
    • Repair any frayed wires by soldering and insulating with heat shrink tubing or replace the entire harness if necessary.

  • Test and Replace Solenoids:

    • If solenoids are faulty, remove the valve body to access them.
    • Replace any defective solenoids and reassemble the valve body, ensuring all bolts are torqued to specifications.