how to reset the oil light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

346 words

Problem Statement

Learn how to reset the oil light on your 2020-present Toyota Highlander XU70 after an oil change. Step-by-step guide for accurate engine oil monitoring.

Affected Component

Engine

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and secured before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Maintenance reminder message appears
•No other engine warning lights are present
•Oil change has recently been performed

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Check the oil level and condition to confirm an oil change is necessary.
3
Confirm the oil change has been completed and all components are properly installed.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob
•Owner's manual (if needed)

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: key fob, owner's manual (if needed).
Ensure the vehicle is parked on a level surface and in "Park" mode.

2. Reset the Oil Light

Insert the key fob into the ignition (or press the start button without pressing the brake pedal) to turn the vehicle to the "ON" position.
Press the "ODO/TRIP" button on the instrument cluster until the odometer display shows the total mileage.
Turn the ignition off.
While holding the "ODO/TRIP" button, turn the ignition back to the "ON" position.
Continue holding the button for approximately 10 seconds until the oil light blinks and then turns off.
Release the "ODO/TRIP" button.

3. Verify Reset

Turn the ignition off and then back on to ensure the oil light is no longer illuminated.