FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)?

how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
389 words

Problem Statement

Learn how to reset the maintenance light on your 2020-Present Toyota Highlander XU70. Follow our step-by-step guide for a quick and easy fix.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the ignition is off before starting the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for scheduled maintenance appearing
  • •No other engine performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked on a level surface and is in "Park".
2. Resetting the Maintenance Light
  1. Turn Off the Ignition: Make sure the ignition is completely off before proceeding.
  2. Press and Hold the Odometer Reset Button: Locate the trip reset button on the instrument cluster and press it down firmly.
  3. Turn the Ignition On: Insert the key and turn it to the "On" position without starting the engine. The dashboard lights should illuminate.
  4. Wait for the Light to Flash: Keep holding the trip reset button until you see the maintenance light start to flash, then turn off.
  5. Release the Button: Once the maintenance light turns off, release the trip reset button.
  6. Turn Off the Ignition: Turn the ignition switch back to the "Off" position.
  7. Start the Engine: Turn the key to start the engine and ensure that the maintenance light does not illuminate.