FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)?

how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
362 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •Vehicle performance is normal, but the light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this process.
  • Ensure the vehicle is parked in a safe location with the engine off.
2. Reset Maintenance Light

  1. Turn Off the Vehicle

    • Make sure the ignition is completely off.

  2. Locate the Trip Meter Reset Button

    • The button is typically located on the instrument cluster near the speedometer.

  3. Hold the Trip Meter Reset Button

    • Press and hold the button firmly.

  4. Turn Ignition On

    • While holding the button, turn the ignition key to the "ON" position (do not start the engine).

  5. Watch for the Maintenance Light

    • Continue holding the button until the maintenance light turns off (may take a few seconds).

  6. Release the Button

    • Once the light is off, release the trip meter reset button.