how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on a 2020-present Toyota Highlander XU70. Step-by-step guide for quick and easy maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and parked before performing this reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder displayed on the multi-information display
•Vehicle maintenance reminder alert active

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'START' button without pressing the brake pedal to turn on the accessory mode.
3
Use the odometer button to navigate to the 'Trip A' screen on the multi-information display.
4
Turn the vehicle off completely.
5
Press and hold the odometer reset button while turning the vehicle back to accessory mode.
6
Release the odometer reset button when the maintenance light starts to blink and then goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required.

Parts Required

•No parts required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'START' button without pressing the brake pedal to turn on the accessory mode.
3
Use the odometer button to navigate to the 'Trip A' screen on the multi-information display.
4
Turn the vehicle off completely.
5
Press and hold the odometer reset button while turning the vehicle back to accessory mode.
6
Release the odometer reset button when the maintenance light starts to blink and then goes off.

Solution

1. Preparation

Gather necessary tools:
- No tools required for this process.
Ensure the vehicle is parked safely.

2. Access Mode

Press the "START" button to activate the accessory mode without pressing the brake.
Confirm that the dashboard lights up and the multi-information display is functional.

3. Reset the Maintenance Light

Navigate to the "Trip A" screen using the odometer button.
Turn off the vehicle completely.
While holding the odometer reset button, turn the ignition back to the accessory mode by pressing the "START" button again.
Keep holding the odometer reset button until the maintenance light blinks and then turns off.