how to reset maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or maintenance displayed
•No other performance issues noted

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Trip' button on the instrument cluster.
3
Turn the ignition switch to the 'ON' position without starting the engine.
4
Continue holding the 'Trip' button until the maintenance light begins to flash and then turns off.
5
Release the 'Trip' button after the light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None needed, but a digital clock can help with timing

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Trip' button on the instrument cluster.
3
Turn the ignition switch to the 'ON' position without starting the engine.
4
Continue holding the 'Trip' button until the maintenance light begins to flash and then turns off.
5
Release the 'Trip' button after the light has turned off.

Solution

1. Preparation

Gather the necessary tools: a digital or analog clock (optional for timing).
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Accessing the Trip Button

Locate the "Trip" button on the instrument cluster, typically found near the odometer display.

3. Resetting the Maintenance Light

Press and hold the "Trip" button.
While holding the button, turn the ignition switch to the "ON" position (do not start the engine).
Keep holding the "Trip" button until the maintenance light flashes and then goes out (approximately 10 seconds).
Release the "Trip" button.

4. Verification of Reset

Turn off the ignition and then restart the vehicle to ensure the maintenance light is no longer illuminated.