FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to repair the windshield wiper not working on my Toyota Highlander XU70 (2020-Present)? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how to repair the windshield wiper not working on my Toyota Highlander XU70 (2020-Present)?

how to repair the windshield wiper not working on my Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
512 words

Problem Statement

Learn how to diagnose and repair windshield wiper issues on your 2020-Present Toyota Highlander XU70. Step-by-step guide with symptoms and solutions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shock.

Symptoms

  • •Windshield wipers do not operate at all
  • •Wipers operate intermittently or erratically
  • •Wiper motor makes a noise but does not move the wipers
  • •No response from the wiper control stalk
  • •Warning lights on the dashboard related to the wiper system

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Screwdriver set
  • •Jumper wires
  • •Fuse puller
  • •Socket set

Parts Required

  • •Wiper control stalk (if damaged)
  • •Wiper motor (if defective)
  • •Wiper blades (if worn)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and materials.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the battery to prevent electrical shock.
2. Inspect the Wiper Control Stalk
  • Remove the steering column cover using a screwdriver.
  • Check the wiring connections to the wiper stalk for any loose or damaged wires.
  • If damaged, replace the wiper control stalk.
3. Check the Wiper Fuse
  • Locate the fuse box, typically under the dashboard or in the engine compartment.
  • Use a fuse puller to remove the wiper fuse.
  • Inspect the fuse for continuity. Replace with the same amperage if blown.
4. Test the Wiper Motor
  • Disconnect the wiper motor connector.
  • Using jumper wires, connect the motor directly to the battery (positive to positive, negative to negative).
  • If the motor does not run, replace the wiper motor.
5. Inspect the Wiring and Linkage
  • Trace the wiring from the fuse to the wiper motor, checking for breaks or frays.
  • Remove the wiper arms by unscrewing the nuts at the base.
  • Check the wiper linkage for any signs of wear, rust, or disconnection. Clean or replace as necessary.
6. Reassemble and Reconnect
  • Reattach the wiper arms securely and ensure they are aligned correctly.
  • Reconnect the battery and test the wipers in all settings.