FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the trunk not opening issue in Toyota Highlander XU70 (2020-Present) - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how to fix the trunk not opening issue in Toyota Highlander XU70 (2020-Present)

how to fix the trunk not opening issue in Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
594 words

Problem Statement

Learn how to diagnose and fix trunk not opening issue in Toyota Highlander XU70 (2020-present). Step-by-step guide with tools and parts required.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to avoid shorts or shocks.

Symptoms

  • •Trunk does not open using the key fob
  • •Trunk does not open using the interior release button
  • •Trunk does not open manually from the outside
  • •No sound or movement when attempting to open
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Screwdriver set
  • •Multimeter
  • •Socket set
  • •Torx wrench set

Parts Required

  • •Key fob battery (CR2032)
  • •Trunk latch (if needed)
  • •Trunk release button (if faulty)
  • •Trunk actuator (if needed)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and replacement parts.
  • Disconnect the vehicle battery to ensure safety.

Tools Required:

  • Screwdriver set
  • Multimeter
  • Socket set
  • Torx wrench set
2. Inspect and Replace the Key Fob Battery
  • Open the key fob using a small screwdriver.
  • Remove the old battery and replace it with a new CR2032 battery, ensuring correct polarity.
  • Reassemble the key fob and test the trunk release function.
3. Inspect the Interior Trunk Release Button
  • Remove the interior panel around the trunk release button using a screwdriver.
  • Check for any loose connections or damaged wires.
  • If the button is damaged, disconnect it and replace with a new button.
  • Reassemble the interior panel.
4. Access the Trunk Latch Mechanism
  • Fold down the rear seats to gain access to the trunk area.
  • Remove the trunk trim panel to expose the latch mechanism.
  • Inspect the latch for any physical damage or obstructions. Clean it if necessary.
  • If the latch appears faulty, remove it using a socket set and replace it with a new latch.
5. Check the Wiring and Connectors
  • Visually inspect all wiring leading to the trunk latch for fraying or damage.
  • Use a multimeter to test for continuity in the wires.
  • Repair or replace any damaged wiring or connectors as needed.
6. Test the Trunk Release Actuator
  • Disconnect the actuator from its connector.
  • Connect the actuator directly to a 12V power source to see if it operates.
  • If the actuator does not function, replace it with a new unit.