how do I reset the maintenance light on my Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

365 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the engine is off before performing these steps.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights active
•Vehicle runs smoothly after maintenance

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is showing the total mileage (not trip A or B).
3
Press and hold the trip meter reset button on the instrument cluster.
4
While holding the reset button, turn the ignition switch off and then back to the 'ON' position.
5
Continue to hold the reset button until the maintenance light blinks and then goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is showing the total mileage (not trip A or B).
3
Press and hold the trip meter reset button on the instrument cluster.
4
While holding the reset button, turn the ignition switch off and then back to the 'ON' position.
5
Continue to hold the reset button until the maintenance light blinks and then goes off.

Solution

1. Preparation

Gather necessary tools: none required.
Ensure the vehicle is in a safe location with the engine off.

2. Turn Ignition On

Insert the key and turn the ignition to the "ON" position without starting the engine.

3. Set Odometer Display

Check that the odometer is displaying the total mileage.
If it is not, toggle to the total mileage display using the trip meter button.

4. Reset Maintenance Light

Press and hold the trip meter reset button.
While holding the button, turn the ignition off.
Turn the ignition back to the "ON" position while still holding the button.
Release the button after the maintenance light blinks and goes off.

5. Confirm Reset

Start the engine to ensure the maintenance light is no longer illuminated.