FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I fix the transmission slipping in my Toyota Highlander XU70 (2020-Present) - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how do I fix the transmission slipping in my Toyota Highlander XU70 (2020-Present)

how do I fix the transmission slipping in my Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
570 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in your 2020-present Toyota Highlander XU70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the transmission fluid reservoir.
  • •Use gloves to protect against sharp edges and fluid spills.

Symptoms

  • •Check engine light illuminated
  • •Engine RPMs increase without corresponding acceleration
  • •Harsh or delayed shifting between gears
  • •Unusual noises during gear changes (e.g., grinding or whining)
  • •Fluid leaks under the vehicle
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Transmission fluid pump
  • •Funnel
  • •Socket set
  • •Torque wrench
  • •Screwdrivers

Parts Required

  • •Transmission fluid (Toyota ATF Type T-IV)
  • •Transmission filter
  • •Gasket material (if applicable)
  • •Transmission control module (if needed)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface, and engage the parking brake.
  • Disconnect the battery to avoid electrical issues.
2. Check and Replace Transmission Fluid
  • Sub-steps:
    • Remove the transmission dipstick and wipe it clean.
    • Insert the dipstick back into the tube and pull it out again to check the fluid level.
    • If low, add the recommended transmission fluid (Toyota ATF Type T-IV).
    • If fluid is dark or burnt-smelling, proceed to replace the fluid.
  • Tools Required: Transmission fluid pump, funnel, torque wrench.
  • Safety Warnings: Ensure the engine is cool before proceeding with fluid inspection.
3. Replace Transmission Filter
  • Sub-steps:
    • Remove the transmission pan bolts using a socket set.
    • Carefully lower the pan to avoid spilling fluid.
    • Remove the old filter and replace it with a new one.
    • Clean the pan and apply new gasket material before reattaching the pan.
  • Tools Required: Socket set, gasket scraper, torque wrench.
  • Safety Warnings: Use gloves to protect against sharp edges and fluid spills.
4. Inspect and Repair Transmission Control Module (if necessary)
  • Sub-steps:
    • Locate the TCM in the vehicle (refer to the service manual for the exact location).
    • Inspect for any visible damage or loose connections.
    • If faulty, replace the TCM with a compatible part.
  • Tools Required: Screwdrivers, socket set.
  • Safety Warnings: Make sure the battery is disconnected before working on electrical components.