FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I fix the rear AC not blowing cold air in my Toyota Highlander XU70? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/how do I fix the rear AC not blowing cold air in my Toyota Highlander XU70?

how do I fix the rear AC not blowing cold air in my Toyota Highlander XU70?

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
565 words

Problem Statement

Learn how to diagnose and fix rear AC not blowing cold air in Toyota Highlander XU70. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on any components related to the AC system.

Symptoms

  • •Rear AC vents blowing warm air
  • •Increased humidity inside the vehicle
  • •Unusual noises from the AC system (e.g., hissing or clicking)
  • •Front AC functioning normally while rear AC does not
  • •Rear AC controls unresponsive or malfunctioning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Refrigerant pressure gauge
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Vacuum or compressed air

Parts Required

  • •Rear AC blower motor (if needed)
  • •AC control module (if needed)
  • •Refrigerant (R-134a)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and ensure the engine is off.
  • Disconnect the battery to prevent electrical shorts.
2. Check Refrigerant Level
  • Use a refrigerant gauge to assess the refrigerant level in the AC system.
  • If low, recharge the system with the appropriate refrigerant (R-134a or as specified by the manufacturer).
3. Inspect and Replace the Blower Motor (if necessary)
  • Locate the rear AC blower motor, typically found under the rear passenger area.
  • Remove any panels covering the blower motor.
  • Disconnect the electrical connector from the blower motor.
  • Test the motor with a multimeter; replace if it does not show continuity.
  • Install the new blower motor by reversing the removal process.
4. Check and Replace AC Control Module (if necessary)
  • Locate the AC control module in the dashboard.
  • Remove the module by unscrewing it from its mount.
  • Test for error codes; if faulty, replace with a new module.
  • Reinstall the new module ensuring all connections are secure.
5. Inspect and Clean AC Components
  • Check the condenser and evaporator for dirt or debris that may block airflow.
  • Clean any obstructions using compressed air or a vacuum.
  • If there are leaks, repair or replace the affected components.