What should I check if the cruise control is not working on my 2020 Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

4 min read

648 words

Problem Statement

Learn how to diagnose and fix cruise control issues on your 2020 Toyota Highlander with these detailed steps and required tools.

Affected Component

Cruise Control System

Estimated Time

1-2 hours

Symptoms

•Cruise control indicator light is off or blinking.
•Unable to engage cruise control (no response when activating).
•Cruise control disengages unexpectedly.
•Inconsistent speed while cruise control is activated.

Diagnostic Steps

1
Check for Dashboard Indicator Light
2
Inspect the Cruise Control Switch
3
Verify Brake Pedal Functionality
4
Check Fuses
5
Scan for Diagnostic Trouble Codes (DTCs)
6
Inspect Throttle Position Sensor (TPS)
7
Evaluate Vehicle Speed Sensor (VSS)

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II Scanner
•Multimeter
•Basic hand tools (screwdriver set, socket set)
•Vehicle Owner’s Manual

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Diagnosing Cruise Control Issues on a 2020 Toyota Highlander

If the cruise control on your 2020 Toyota Highlander is not functioning, follow these detailed steps to diagnose and potentially fix the issue.

Tools Required

OBD-II Scanner (for diagnostic trouble codes)
Multimeter (for electrical checks)
Basic hand tools (screwdriver set, socket set)
Vehicle Owner’s Manual (for reference of specific components)

Repair Instructions

Replace Faulty Components:
- If any of the components (cruise control switch, brake light switch, TPS, VSS) are found to be faulty during diagnosis, proceed to replace them.
Reconnecting Wiring:
- Ensure all connectors and wiring harnesses are securely connected. Repair or replace any damaged wiring.
Clear Diagnostic Codes:
- After repairs, use the OBD-II scanner to clear any stored codes.
- Turn off the vehicle and restart to check if the cruise control system operates as expected.
Test the Cruise Control:
- Take the vehicle for a test drive on a safe, open road.
- Activate the cruise control and observe its functionality.
- Check for consistent operation and ensure it engages and disengages properly.
Consult a Professional:
- If cruise control still does not work after performing all checks and repairs, it may require professional diagnostic equipment and expertise. Consider visiting a Toyota dealership or certified mechanic.

Conclusion

By following these steps, you should be able to diagnose and potentially resolve the cruise control issues on your 2020 Toyota Highlander. Always refer to the vehicle’s service manual for specific details and component locations. Safety first: ensure that any work performed is done in a safe environment, and always disconnect the battery when working on the electrical systems.