FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What does it mean if the ABS light is on in a 2022 Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/What does it mean if the ABS light is on in a 2022 Highlander?

What does it mean if the ABS light is on in a 2022 Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
653 words

Problem Statement

Learn about the ABS light in your 2022 Toyota Highlander, its symptoms, diagnostic steps, and repair instructions.

Affected Component
ABS system
Estimated Time
2-4 hours

Symptoms

  • •ABS Warning Light
  • •Brake Pedal Feel
  • •Reduced Braking Performance
  • •Traction Control Warning
  • •Unusual Brake Behavior

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Brake fluid tester
  • •Torque wrench
  • •Basic hand tools (sockets, wrenches)
  • •Safety gloves and goggles

Additional Information

Affected Component
ABS system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Understanding the ABS Light in a 2022 Toyota Highlander

The ABS (Anti-lock Braking System) light illuminating on the dashboard indicates a potential issue with the ABS system. While your vehicle may still function normally, the ABS system may not be operational, which can affect braking, especially in slippery conditions.

Tools Required:
  • OBD-II Scanner
  • Multimeter
  • Brake fluid tester
  • Torque wrench
  • Basic hand tools (sockets, wrenches)
  • Safety gloves and goggles

Step 1: Initial Inspection

  • Check the Dashboard: Confirm that the ABS light is on, and note if there are any other warning lights.
  • Visual Inspection: Inspect the brake fluid reservoir. Ensure it is at the recommended level. Low brake fluid can trigger the ABS light.

Step 2: Scan for Diagnostic Trouble Codes (DTCs)

  • Connect an OBD-II Scanner: Use the scanner to check for any stored codes related to the ABS.
  • Note Codes: Write down any codes that appear. Common ABS codes include C0200 (Wheel Speed Sensor), C0210 (ABS Pump Motor), or C1300 (Control Module).

Step 3: Check Wheel Speed Sensors

  • Locate Sensors: Each wheel has a speed sensor. Check the wiring and connectors for damage or corrosion.
  • Test Sensors: Use a multimeter to check the resistance of each sensor. The resistance should typically be around 1,000 to 1,500 ohms. If there's no continuity or the readings are outside the normal range, replace the sensor.

Step 4: Inspect ABS Module and Pump

  • Check Connections: Inspect the ABS module's electrical connections for corrosion or damage.
  • Test the ABS Pump: If the ABS light persists, the pump may be malfunctioning. Using a multimeter, check for voltage at the pump connector when the brake pedal is pressed.

Step 5: Brake Fluid and System Check

  • Check Brake Fluid Quality: Use a brake fluid tester to assess the moisture content. If the fluid is contaminated, replace it.
  • Bleed Brakes: Air in the brake lines can also trigger the ABS light. Bleed the brakes to ensure there are no air bubbles.
Repair Instructions

Step 1: Replace Defective Parts

  • Wheel Speed Sensors: If any sensors were found to be faulty, replace them. Follow these instructions:

    1. Remove the wheel.
    2. Disconnect the sensor connector.
    3. Remove the mounting bolt and sensor.
    4. Install the new sensor, torque to manufacturer specifications, reconnect, and reassemble the wheel.

  • ABS Module or Pump: If the ABS pump or module is faulty, refer to the service manual for specific replacement instructions. Generally:

    1. Disconnect the battery.
    2. Remove any components obstructing access to the ABS module.
    3. Disconnect the electrical connectors.
    4. Remove the mounting bolts and replace the module/pump, then reassemble.

Step 2: Reset the ABS System

  • Clear Codes: After repairs, use the OBD-II scanner to clear the codes from the system.
  • Recheck: Start the vehicle and check if the ABS light remains off after driving a short distance.

Step 3: Test Drive

  • Conduct a test drive in a safe area to ensure the ABS system engages properly (you may feel the ABS working if you brake hard on slippery surfaces).
Conclusion

If, after following these steps, the ABS light remains illuminated or if you encounter further braking issues, it is advisable to consult with a professional technician or authorized Toyota service center for a thorough inspection. Always prioritize safety and ensure your braking system is fully functional.