FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the windshield wiper fluid warning on my Toyota Highlander Fourth Generation (2020-pres... - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to reset the windshield wiper fluid warning on my Toyota Highlander Fourth Generation (2020-pres...

how to reset the windshield wiper fluid warning on my Toyota Highlander Fourth Generation (2020-pres...

Toyota Highlander Fourth Generation (2020-present)

Error Codes
15-30 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
359 words

Problem Statement

Learn how to reset the windshield wiper fluid warning on your 2020-present Toyota Highlander. Step-by-step guide for a quick fix.

Affected Component
Electrical
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the engine is off and the ignition key is removed before performing maintenance.

Symptoms

  • •Windshield wiper fluid warning light illuminated on the dashboard
  • •No warning light after refilling the fluid (if applicable)
  • •Possible low fluid level in the reservoir

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •Windshield washer fluid (if needed)

Additional Information

Affected Component
Electrical
Estimated Time
15-30 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Refill Windshield Wiper Fluid
  1. Open the hood of the vehicle.
  2. Locate the windshield washer fluid reservoir (typically marked with a windshield/water symbol).
  3. Remove the cap from the reservoir.
  4. Fill the reservoir with the appropriate windshield washer fluid until it reaches the full mark.
  5. Replace the cap securely.
3. Reset the Warning Light
  1. Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical accessories.
  2. Use the steering wheel controls to navigate to the "Settings" menu on the multi-information display.
  3. Select "Maintenance."
  4. Choose "Windshield Washer Fluid" and follow the prompts to reset the warning light.
  5. Turn off the vehicle and then restart it to ensure the warning light is cleared.