how to reset the oil change light on Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the oil change light on a 2020-2023 Toyota Highlander. Step-by-step guide to ensure accurate maintenance tracking.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder notification displayed
•Engine oil change completed but light remains on

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the odometer/trip reset button on the instrument panel.
3
Turn the ignition off and then back to the 'ON' position.
4
Press and hold the odometer/trip reset button.
5
Observe the oil change light and wait for it to flash or turn off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the odometer/trip reset button on the instrument panel.
3
Turn the ignition off and then back to the 'ON' position.
4
Press and hold the odometer/trip reset button.
5
Observe the oil change light and wait for it to flash or turn off.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the engine is turned off.
Have the vehicle keys ready to access the ignition.

2. Turn Ignition On

Insert the key into the ignition or press the start button without pressing the brake pedal to turn the ignition to the "ON" position.

3. Reset the Oil Change Light

Step 1: Locate the odometer/trip reset button on the dashboard.
Step 2: Press and hold the odometer/trip reset button while the ignition is on.
Step 3: While holding the button, turn the ignition off and then back to the "ON" position (do not start the engine).
Step 4: Continue to hold the button until the oil change light blinks and then turns off. This typically takes about 10 seconds.
Step 5: Release the button once the light is reset.

4. Confirm Reset

Turn off the ignition and then turn it back on to verify that the oil change light is no longer illuminated.