how to reset the oil change light in Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

340 words

Problem Statement

Learn how to reset the oil change light in your 2020-present Toyota Highlander. Step-by-step guide to ensure your maintenance reminder is cleared.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in 'Park' or 'Neutral' before performing resets to avoid unintended movement.

Symptoms

•Oil change light remains illuminated on the dashboard.
•Maintenance reminder notification may appear on the display.
•Engine oil has been changed but warning light persists.

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and all doors are closed.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Check the dashboard for confirmation that the oil change light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob
•Ignition key

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather the necessary tools: key fob or ignition key.
Ensure the vehicle is in a safe location with the engine off.

2. Turn On Ignition

Insert the key or press the start button (without pressing the brake pedal for push-start models) to turn the ignition to the "On" position.

3. Reset Oil Change Light

Press the gas pedal three times within five seconds.
Observe the dashboard; the oil change light should turn off, confirming the reset.

4. Confirm Reset

Turn the ignition off and then start the engine.
Verify that the oil change light is no longer illuminated.