how to reset the maintenance light on Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

401 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No change in vehicle performance
•No other warning lights displayed

Diagnostic Steps

1
Ensure the vehicle is turned off and keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Confirm that the odometer display is showing mileage, not the trip meter.
4
Locate the 'Reset' button on the instrument panel or use the controls on the steering wheel.
5
Follow the reset sequence specific to the model.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Confirm that the odometer display is showing mileage, not the trip meter.
4
Locate the 'Reset' button on the instrument panel or use the controls on the steering wheel.
5
Follow the reset sequence specific to the model.

Solution

1. Preparation

Gather necessary items: vehicle key or key fob.
Ensure the vehicle is parked safely and in a well-ventilated area.

2. Turn on the Ignition

Insert the key into the ignition or use the push-button start.
Turn the key to the "ON" position or press the "Start" button twice (do not start the engine).

3. Access the Odometer

Check the instrument cluster to ensure the odometer reading is displayed.
If it is showing the trip meter, press the "Trip" button until the odometer is displayed.

4. Reset the Maintenance Light

Press and hold the "Reset" button (if available) or use the steering wheel controls.
Hold the button for approximately 10 seconds until the maintenance light flashes and then turns off.

5. Verify Reset

Turn off the ignition and then turn it back on to check that the maintenance light is no longer illuminated.