FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present) - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
348 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2020-present) with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in 'Park' mode before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle operates normally but requires maintenance reminder reset

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required.

Parts Required

  • •None required.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Resetting the Maintenance Light
  1. Position the Vehicle
    • Ensure the vehicle is in the "OFF" position.
  2. Press and Hold the Odometer Reset Button
    • Locate the odometer reset button on the instrument panel.
    • Press and hold the button.
  3. Turn On Ignition
    • While still holding the odometer reset button, turn the key to the "ON" position (do not start the engine).
  4. Watch for the Maintenance Light
    • Hold the button until the maintenance light begins to flash and then goes off.
  5. Release the Odometer Reset Button
    • Once the maintenance light is off, release the odometer reset button.