how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

347 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2020-present) with this simple step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and the engine is off before attempting to reset the maintenance light.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle running normally outside of the maintenance indicator

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Check the odometer reading to know the current mileage before resetting.
4
Turn the ignition off and then back to the 'ON' position.
5
Press and hold the trip/reset button until the maintenance light blinks and turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Check the odometer reading to know the current mileage before resetting.
4
Turn the ignition off and then back to the 'ON' position.
5
Press and hold the trip/reset button until the maintenance light blinks and turns off.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked safely with the engine off.

2. Ignition Position

Insert the key into the ignition or press the start button without pressing the brake pedal to put the vehicle in the "ON" position.
Verify that the dashboard lights illuminate, including the maintenance light.

3. Reset the Maintenance Light

Locate the trip/reset button on the dashboard.
With the ignition still in the "ON" position, press and hold the trip/reset button.
Continue to hold the button until the maintenance light blinks and then turns off (this may take about 10 seconds).
Release the trip/reset button.

4. Verification

Turn the ignition off and then back on to check that the maintenance light is no longer illuminated.
Ensure that the odometer reading displays normally.