FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present) - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
414 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander. Follow our step-by-step guide for a quick and easy solution.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked safely and the engine is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed in the multi-information display
  • •Vehicle maintenance reminder may appear during startup

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this process.

Parts Required

  • •None required for this process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary equipment, if any (usually none required for this procedure).
  • Ensure the vehicle is parked in a safe location with the engine off.
2. Resetting the Maintenance Light

  1. Turn the Ignition On

    • Insert the key or use the push-button start to turn the ignition to the "On" position without starting the engine.

  2. Odometer Display

    • Check that the odometer is displaying the total mileage (not trip mileage).

  3. Turn Off the Ignition

    • Completely turn the ignition off.

  4. Press and Hold the Trip Meter Reset Button

    • Locate the trip meter reset button, usually found on the instrument cluster.
    • Press and hold this button down.

  5. Turn Ignition Back On

    • While still holding the trip meter reset button, turn the ignition back to the "On" position.

  6. Release the Button

    • Keep holding the button until the maintenance light flashes and then extinguishes, indicating a successful reset.