FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present) - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
362 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander. Step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe place with the engine off while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the multi-information display
  • •Vehicle has been serviced but light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No tools required for this procedure.

Parts Required

  • •No parts required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface, and the ignition is turned off.
  • Gather necessary tools: none required for this procedure.
2. Reset Maintenance Light
  1. Turn Off Ignition: Make sure the vehicle is completely powered down.
  2. Press and Hold Trip Meter Button: Locate the trip meter reset button on the dashboard and press it firmly. Keep it pressed.
  3. Turn Ignition to ON: While still holding the trip meter button, turn the ignition key to the "ON" position (do not start the engine).
  4. Watch for Light: Continue holding the trip meter button until the maintenance light begins to flash and then turns off, which indicates the reset was successful.
  5. Release the Button: Once the light is off, release the trip meter reset button.