FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the rear air conditioning not working in my Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to fix the rear air conditioning not working in my Toyota Highlander?

how to fix the rear air conditioning not working in my Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
548 words

Problem Statement

Learn how to diagnose and fix rear A/C not working in Toyota Highlander. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the vehicle to cool down before inspecting A/C components.

Symptoms

  • •Rear air conditioning vents blowing warm air
  • •Rear A/C control panel not responding
  • •Unusual noises when rear A/C is activated
  • •Refrigerant leaks around the rear A/C components
  • •Front air conditioning functioning normally

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Manifold gauge set
  • •Multimeter
  • •Socket set
  • •Torque wrench

Parts Required

  • •Rear blower motor (if defective)
  • •Refrigerant (R-134a)
  • •A/C hose or seals (if leaks are found)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and safety gear: gloves, safety glasses, manifold gauge set, multimeter, socket set, and torque wrench.
  • Disconnect the negative battery terminal to ensure safety.
2. Check and Recharge Refrigerant
  • a. Connect Manifold Gauges: Attach the high and low pressure gauges to the respective service ports on the rear A/C system.
  • b. Check Pressure Readings: Ensure the system is within the manufacturer's specified range.
  • c. Add Refrigerant: If low, add the appropriate type of refrigerant (typically R-134a) until proper levels are reached, monitoring the pressures.
3. Inspect and Replace Blower Motor
  • a. Access Blower Motor: Remove the rear A/C unit cover by unscrewing it (refer to the service manual for exact locations).
  • b. Remove Blower Motor: Disconnect the electrical connector and unscrew the blower motor from its housing.
  • c. Install New Blower Motor: Place the new blower motor in position, secure it with screws, and reconnect the electrical connector.
4. Repair Any Leaks
  • a. Inspect A/C Lines: Visually check all lines for signs of wear or damage.
  • b. Use UV Dye: If leaks are suspected, introduce UV dye into the system and run the A/C to help locate leaks.
  • c. Replace Damaged Components: If leaks are found, replace the affected hoses or seals, ensuring all connections are tight.
5. Reassemble and Test
  • a. Reinstall Covers: Once repairs are made, reattach the rear A/C unit cover securely.
  • b. Reconnect Battery: Reconnect the negative battery terminal.
  • c. Test A/C Functionality: Start the vehicle and test the rear A/C for proper operation, ensuring cool air flows from the vents.