FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to clear the maintenance light on my Toyota Highlander Fourth Generation (2020-present)? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to clear the maintenance light on my Toyota Highlander Fourth Generation (2020-present)?

how to clear the maintenance light on my Toyota Highlander Fourth Generation (2020-present)?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
363 words

Problem Statement

Learn how to clear the maintenance light on your 2020-present Toyota Highlander. Step-by-step guide to reset the maintenance reminder light.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the engine is turned off before performing this procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the multi-information display
  • •No other warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Gather necessary tools: None required for this procedure.
2. Clear Maintenance Light

  1. Turn Off Ignition

    • Ensure the vehicle is completely off.

  2. Press and Hold Odometer Reset

    • Locate the odometer reset button on the dashboard (usually near the speedometer).
    • Press and hold the button.

  3. Turn Ignition to ON Position

    • While holding the odometer reset button, turn the ignition key to the "ON" position without starting the engine.
    • The dashboard lights will illuminate.

  4. Wait for the Maintenance Light to Clear

    • Keep holding the odometer reset button until the maintenance light on the dashboard flashes and then turns off.

  5. Release the Odometer Reset Button

    • Once the maintenance light has turned off, release the odometer reset button.