FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot issues with the key fob for my 2020 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I troubleshoot issues with the key fob for my 2020 Toyota Highlander?

How do I troubleshoot issues with the key fob for my 2020 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
1 hour
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
544 words

Problem Statement

Learn how to troubleshoot and resolve key fob issues for your 2020 Toyota Highlander with step-by-step instructions and necessary tools.

Affected Component
key fob
Estimated Time
1 hour

Symptoms

  • •Key Fob Not Responding
  • •Intermittent Functioning
  • •Warning Lights
  • •Inability to Start the Vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Screwdriver
  • •Multimeter
  • •Replacement Battery
  • •Basic Hand Tools

Additional Information

Affected Component
key fob
Estimated Time
1 hour
Difficulty
medium
Severity
medium
Tools Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting Key Fob Issues for a 2020 Toyota Highlander

Step 1: Visual Inspection
  • Check for Physical Damage: Look for cracks or damage to the key fob casing.
  • Inspect Buttons: Ensure buttons are not stuck or jammed.
  • Battery Compartment: Open the key fob and check for corrosion or damage in the battery compartment.
Step 2: Battery Check
  • Battery Type: Confirm that you have the correct battery type (usually CR2032 for Toyota key fobs).
  • Battery Replacement: Replace the battery if it is more than two years old or if the fob shows signs of low battery.
Step 3: Key Fob Reprogramming
  • Check for Reprogramming: Sometimes, the key fob may need to be reprogrammed if it becomes unresponsive.
  • Instructions for Reprogramming:
    1. Sit in the driver's seat with all doors closed.
    2. Insert the key into the ignition without starting the engine.
    3. Cycle the key from OFF to ON five times within 15 seconds (the fifth time leave it in ON).
    4. Open and close the driver's side door to complete the programming process.
    5. Try the key fob to see if it functions.
Step 4: Proximity Sensor Check
  • Keyless Start Function: If the vehicle has a push-button start, ensure the fob is within range.
  • Interference: Check for interference from other electronic devices, which may affect the key fob's signal.
Tools Required
  • Screwdriver: To open the key fob casing (usually a small Phillips or flat-head).
  • Multimeter: To check battery voltage (optional).
  • Replacement Battery: CR2032 or specified battery for your key fob.
  • Basic Hand Tools: For any additional repairs if needed.
Repair Instructions
Battery Replacement

  1. Open the Key Fob:

    • Use a screwdriver to gently pry open the key fob casing.
    • Take note of how the components are arranged.

  2. Remove Old Battery:

    • Carefully remove the old battery from the compartment.

  3. Insert New Battery:

    • Place the new battery in the compartment, ensuring the positive (+) and negative (-) sides are correctly oriented.

  4. Reassemble the Key Fob:

    • Snap the casing back together until it clicks into place.
    • Test the key fob.
Reprogram Key Fob (If Necessary)
  • Follow the reprogramming instructions outlined in Step 3 above to ensure the key fob is synced with the vehicle.
Additional Considerations
  • Spare Key Fob: If you have a spare key fob, test it to determine if the issue is isolated to one fob or if it affects both.
  • Dealer Assistance: If the problem persists, consider visiting a Toyota dealer or qualified automotive technician for further diagnostics, as the issue may involve the vehicle's ECU or keyless entry system.

By following these steps, you should be able to troubleshoot and resolve key fob issues for your 2020 Toyota Highlander.