how do I resolve the TPMS warning light on my Toyota Highlander Fourth Generation (2020-present)?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

Learn how to resolve the TPMS warning light issue on your Toyota Highlander (2020-present). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported if working under it.
•Allow tires to cool before checking pressure to avoid inaccurate readings.

Symptoms

•TPMS warning light illuminated on the dashboard
•Possible under-inflation or over-inflation of tires
•Tire pressure readings may be inaccurate
•Reduced fuel efficiency due to improper tire pressure
•Uneven tire wear patterns

Diagnostic Steps

1
Check the tire pressure of all four tires using a tire pressure gauge.
2
Inspect each tire for visible damage, punctures, or foreign objects.
3
Verify that the TPMS sensor is functioning by using an OBD-II scanner to check for any error codes related to the TPMS.
4
Reset the TPMS system following the manufacturer’s instructions.
5
If the warning light remains on, inspect the TPMS sensors for battery life and functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•Tire inflator
•Jack and socket set

Parts Required

•TPMS sensor

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressure of all four tires using a tire pressure gauge.
2
Inspect each tire for visible damage, punctures, or foreign objects.
3
Verify that the TPMS sensor is functioning by using an OBD-II scanner to check for any error codes related to the TPMS.
4
Reset the TPMS system following the manufacturer’s instructions.
5
If the warning light remains on, inspect the TPMS sensors for battery life and functionality.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, OBD-II scanner, tire inflator (if needed), and a jack if tires need to be removed.
Ensure the vehicle is parked on a level surface and the engine is turned off.

2. Check Tire Pressure

Sub-steps:
1. Remove valve stem caps from each tire.
2. Use the tire pressure gauge to measure the air pressure in each tire.
3. Compare readings with the recommended tire pressure listed on the driver’s side door jamb.
4. Inflate or deflate tires as necessary to match the recommended pressure.

3. Inspect Tires

Sub-steps:
1. Visually inspect each tire for cuts, punctures, or bulges.
2. Check tread depth using a tread depth gauge or the penny test.
3. Ensure all tires are secure and properly mounted.

4. Reset TPMS

Sub-steps:
1. Turn the ignition key to the "ON" position without starting the engine.
2. Press and hold the TPMS reset button (usually located beneath the steering wheel) until the TPMS light blinks three times, then release the button.
3. Start the engine and allow it to run for a few minutes to verify the light resets.

5. Sensor Inspection (if needed)

Sub-steps:
1. If the light remains illuminated, use an OBD-II scanner to check for TPMS-related error codes.
2. If a sensor fault is indicated, remove the affected tire using the jack and socket set.
3. Replace the TPMS sensor as needed, ensuring to reset the system afterward.

Tools Required:

Tire pressure gauge
OBD-II scanner
Tire inflator
Jack and socket set (if removing tires)

Parts Required:

TPMS sensor (if replacement is necessary)

Estimated Repair Time: 1-2 hours

Safety Warnings:

Ensure the vehicle is securely lifted and supported if working under it.
Allow tires to cool before checking pressure to avoid inaccurate readings.