FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I reset the maintenance light on my 2022 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I reset the maintenance light on my 2022 Toyota Highlander?

How do I reset the maintenance light on my 2022 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
450 words

Problem Statement

Learn how to easily reset the maintenance light on your 2022 Toyota Highlander with our step-by-step guide.

Affected Component
maintenance light

Symptoms

  • •The maintenance light is illuminated on the dashboard.
  • •Indicates that the vehicle is due for scheduled maintenance.

Diagnostic Steps

  1. 1
  2. 2

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key or key fob

Additional Information

Affected Component
maintenance light
Difficulty
easy
Severity
low
Tools Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Resetting the maintenance light on your 2022 Toyota Highlander is a straightforward process. Below are detailed steps to guide you through the procedure.

Tools Required
  • No special tools are required for this procedure. Just your vehicle key or key fob.
Reset Instructions

Step 1: Turn on the Ignition

  1. Insert the Key or Press the Start Button: If your Highlander has a key, insert it into the ignition. If it has a push-to-start button, ensure you have the key fob inside the vehicle.
  2. Turn the Ignition to the “On” Position: Do not start the engine. Just turn the key to the "On" position (the second click), or press the start button twice without pressing the brake pedal.

Step 2: Access the Trip Meter

  1. Locate the Trip Meter Button: It is typically found on the instrument panel, usually near the speedometer.
  2. Switch to Trip A: Press the trip meter button until "Trip A" is displayed on the dashboard.

Step 3: Reset the Maintenance Light

  1. Turn Off the Ignition: After ensuring "Trip A" is displayed, turn the ignition off.
  2. Press and Hold the Trip Meter Button: While holding the trip meter button, turn the ignition back to the "On" position without starting the engine.
  3. Wait for the Maintenance Light to Reset: Keep holding the trip meter button until the maintenance light blinks and then turns off. This may take about 10 seconds.
  4. Release the Trip Meter Button: Once the maintenance light has turned off, you can release the trip meter button.

Step 4: Confirm the Reset

  1. Turn Off the Ignition Again: After the light has reset, turn the ignition off once more.
  2. Start the Vehicle: Turn the ignition back to the "On" position and start the vehicle to ensure that the maintenance light is no longer illuminated.
Conclusion

If the maintenance light does not reset after following these steps, there may be an underlying issue that needs to be addressed. In that case, consult your owner’s manual for further instructions or contact a certified Toyota technician.

By following these steps, you can successfully reset the maintenance light on your 2022 Toyota Highlander, ensuring you stay on track with your vehicle’s maintenance schedule.