How do I reset the maintenance light on my 2020 Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

easy

Difficulty

low

Severity

3 min read

482 words

Problem Statement

Learn how to reset the maintenance light on your 2020 Toyota Highlander with these easy steps. Ensure your vehicle is ready for its next service.

Affected Component

maintenance light

Symptoms

•Maintenance light illuminated on the dashboard.
•Dashboard warning appears to remind you of upcoming scheduled maintenance.

Diagnostic Steps

1
Confirm Maintenance Completion: Ensure that all required maintenance has been performed (oil change, tire rotation, etc.).
2
Check the vehicle's manual for any specific maintenance items that may need addressing.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None (manual operation using the vehicle's controls).

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the Maintenance Light on a 2020 Toyota Highlander

The maintenance light on your 2020 Toyota Highlander is an important reminder that it's time for routine maintenance, such as an oil change or other service. If you've completed the necessary maintenance and want to reset the light, follow the steps outlined below.

Tools Required

None (manual operation using the vehicle's controls).

Resetting the Maintenance Light

Follow these detailed steps to reset the maintenance light on your 2020 Toyota Highlander:

Step 1: Turn the Ignition On

Insert the key into the ignition or push the start button without pressing the brake pedal to turn on the electrical systems without starting the engine.

Step 2: Access the Multi-Information Display (MID)

Locate the trip meter reset button on the instrument panel, which is typically located on the right side of the steering wheel or the dashboard.

Step 3: Navigate to the Trip A Meter

Press the trip meter reset button until the display shows "Trip A." This is the mileage that you can reset and serves as the indicator for the maintenance light.

Step 4: Turn Off the Ignition

Turn the ignition off completely.

Step 5: Reset the Maintenance Light

Press and Hold the Trip Meter Reset Button:
- While still holding down the trip meter reset button, turn the ignition back on without starting the engine (press the start button without the brake or turn the key to the "on" position).
Continue Holding the Button:
- Keep holding the trip meter reset button until the maintenance light begins to flash and then turns off. This indicates that the maintenance light has been successfully reset.
Release the Trip Meter Button:
- Once the light goes off, release the trip meter reset button.

Step 6: Confirm Reset

Turn the ignition off and then back on again. Check to ensure that the maintenance light is no longer illuminated.

Additional Tips

It’s a good practice to note the date and mileage of your last service to keep track of when your next maintenance is due.
If the maintenance light remains on after following the above steps, there may be an underlying issue that needs to be diagnosed.

Conclusion

By following these steps, you should be able to successfully reset the maintenance light on your 2020 Toyota Highlander. If you encounter any difficulties or if the light does not turn off, consult your vehicle’s manual or contact a certified Toyota technician for assistance.