FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the parking sensors that are not functioning in a 2022 Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I fix the parking sensors that are not functioning in a 2022 Highlander?

How do I fix the parking sensors that are not functioning in a 2022 Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
655 words

Problem Statement

Learn how to diagnose and repair non-functioning parking sensors in your 2022 Toyota Highlander with step-by-step instructions and required tools.

Affected Component
parking sensors
Estimated Time
2-4 hours

Symptoms

  • •No Audible Alerts
  • •Visual Warnings
  • •Sensor Error Message
  • •Inconsistent Response

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scan Tool
  • •Multimeter
  • •Torque Wrench
  • •Screwdrivers (Phillips and Flathead)
  • •Trim Removal Tools
  • •Socket Set
  • •Cleaning Supplies (soft cloth, mild detergent)

Additional Information

Affected Component
parking sensors
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Non-Functioning Parking Sensors in a 2022 Toyota Highlander
Tools Required
  • OBD-II Scan Tool
  • Multimeter
  • Torque Wrench
  • Screwdrivers (Phillips and Flathead)
  • Trim Removal Tools
  • Socket Set
  • Cleaning Supplies (soft cloth, mild detergent)
Repair Instructions

Step 1: Inspection and Cleaning

  1. Clean the Sensors:

    • Using a soft cloth and mild detergent, clean the parking sensors to remove any dirt or debris that may obstruct their operation.

  2. Visual Inspection:

    • Inspect the sensors for any signs of physical damage. If a sensor is cracked or broken, it will need to be replaced.

Step 2: Check for Electrical Issues

  1. Scan for Codes:

    • Connect the OBD-II scanner to the vehicle's diagnostic port.
    • Retrieve any fault codes related to the parking sensor system. Note down the codes for reference.

  2. Inspect Wiring:

    • Remove the rear bumper cover (if necessary) to access the wiring harness connected to the sensors.
    • Check for loose connectors, frayed wires, or corrosion. Repair or replace any damaged components.

  3. Test Sensor Voltage:

    • With the multimeter, set it to measure DC voltage.
    • While someone else puts the vehicle in reverse, probe the sensor connector pins. You should see a voltage reading near the manufacturer specified range (typically around 12V).
    • If there is no voltage present, trace back to the wiring harness and check the connections and fuses.

Step 3: Replace Faulty Sensors

  1. Identify Malfunctioning Sensor:

    • If the diagnostic scans indicated a specific sensor as faulty, remove that sensor.

  2. Remove the Sensor:

    • Use the appropriate socket or screwdriver to remove the retaining screws holding the sensor in place.
    • Disconnect the wiring harness from the sensor.

  3. Install New Sensor:

    • Connect the new sensor to the wiring harness.
    • Secure it in place with the retaining screws. Use a torque wrench to tighten to specifications (refer to service manual).

Step 4: Reassemble and Test

  1. Reassemble Rear Bumper:

    • If you removed the rear bumper to access wiring, carefully reattach it, ensuring all clips and screws are secured.

  2. Clear Codes:

    • Use the OBD-II scanner to clear any fault codes from the system.

  3. Test the System:

    • Start the vehicle and put it in reverse. Check if the parking sensors are functioning properly. You should hear audible alerts and see visual feedback on the dashboard.
Conclusion

By following the above steps, you should be able to diagnose and fix the non-functioning parking sensors in your 2022 Toyota Highlander. If after these steps the sensors still do not work, it may be advisable to consult with a professional technician or your local Toyota dealership for further diagnostics.