How do I fix a malfunctioning tire pressure monitoring system in my Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

685 words

Problem Statement

Learn how to diagnose and repair a malfunctioning TPMS in your 2020 Toyota Highlander with step-by-step instructions and required tools.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

2-4 hours

Symptoms

•TPMS warning light illuminated on the dashboard.
•Inaccurate tire pressure readings displayed on the dashboard.
•TPMS warning light blinks and then stays on.
•Tire pressure readings are not available for some or all tires.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•TPMS scan tool
•Tire iron
•Jack and jack stands
•Torque wrench
•Replacement tire pressure sensors
•Valve stem tool
•OBD-II scanner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Fixing a Malfunctioning Tire Pressure Monitoring System (TPMS) in a 2020 Toyota Highlander

Tools Required

Tire pressure gauge
TPMS scan tool
Tire iron (for removing the tire if necessary)
Jack and jack stands
Torque wrench
Replacement tire pressure sensors (if required)
Valve stem tool (for replacing sensors)
OBD-II scanner (optional for DTC retrieval)

Repair Instructions

Step 1: Inflate Tires to Correct Pressure

Use the tire pressure gauge to measure the pressure in each tire.
Inflate or deflate each tire to the recommended pressure (found on the driver’s door jamb).
Re-check the tire pressure after a few minutes.

Step 2: Inspect and Replace Sensors if Necessary

If the sensors are damaged or malfunctioning, remove the tires from the wheels.
- Use the tire iron to loosen lug nuts and jack the vehicle up.
- Remove the wheel and tire assembly.
Locate the TPMS sensor inside the tire.
Use the valve stem tool to remove the sensor from the tire.
Replace it with a new sensor if it is faulty.
Reinstall the tire and wheel assembly, torquing the lug nuts to manufacturer specifications.

Step 3: Relearn the TPMS

For many newer models, use the TPMS scan tool to initiate the relearn procedure. Follow the tool instructions.
If you do not have a scan tool, you can perform the relearn by following these steps:
- Turn the ignition to the “ON” position (do not start).
- Press the TPMS reset button (usually located under the steering wheel) until the TPMS light blinks three times.
- Drive the vehicle at a speed of 25-65 mph for 10-30 minutes to allow the system to relearn the sensors.

Step 4: Clear Codes and Test

Use the TPMS scan tool to clear any diagnostic trouble codes that were logged.
Drive the vehicle for a short distance to see if the TPMS warning light remains off.
Recheck tire pressures with the gauge to ensure all are correctly set.

Conclusion

By following these steps, you should be able to diagnose and repair your malfunctioning TPMS in your 2020 Toyota Highlander. Always refer to the vehicle's service manual for specific details related to your model. If issues persist, consider consulting a professional technician for further diagnosis.

How do I fix a malfunctioning tire pressure monitoring system in my Highlander?

Problem Statement

Symptoms

Diagnostic Steps

Solution

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

How do I fix a malfunctioning tire pressure monitoring system in my Highlander?

Problem Statement

Symptoms

Diagnostic Steps

Solution

Step 1: Inflate Tires to Correct Pressure

Step 2: Inspect and Replace Sensors if Necessary

Step 3: Relearn the TPMS

Step 4: Clear Codes and Test

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

Step 1: Inflate Tires to Correct Pressure

Step 2: Inspect and Replace Sensors if Necessary

Step 3: Relearn the TPMS

Step 4: Clear Codes and Test