FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I address the engine misfire in a 2022 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I address the engine misfire in a 2022 Toyota Highlander?

How do I address the engine misfire in a 2022 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
677 words

Problem Statement

Learn how to diagnose and repair engine misfire issues in a 2022 Toyota Highlander with step-by-step instructions and required tools.

Affected Component
Engine

Symptoms

  • •Rough idling or shaking during driving
  • •Reduced engine performance and acceleration
  • •Check Engine Light (CEL) illuminated
  • •Potentially increased fuel consumption
  • •Engine sounding louder or different than normal

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Torque wrench
  • •Spark plug socket
  • •Compression tester
  • •Fuel pressure gauge
  • •Multimeter (for ignition coil testing)
  • •Vacuum gauge (if needed)
  • •Smoke machine (optional)
  • •Basic hand tools (sockets, wrenches, screwdrivers)

Additional Information

Affected Component
Engine
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Addressing Engine Misfire in a 2022 Toyota Highlander
Tools Required
  • OBD-II scanner
  • Torque wrench
  • Spark plug socket
  • Compression tester
  • Fuel pressure gauge
  • Multimeter (for ignition coil testing)
  • Vacuum gauge (if needed)
  • Smoke machine (optional)
  • Basic hand tools (sockets, wrenches, screwdrivers)

Repair Instructions

Step 1: Addressing Faulty Spark Plugs/Ignition Coils

  1. Remove Ignition Coils:

    • Disconnect the negative battery terminal.
    • Remove the engine cover (if applicable).
    • Unplug the electrical connectors from the ignition coils.
    • Remove the bolts holding the ignition coils in place and gently pull them out.

  2. Inspect and Replace Spark Plugs:

    • Use a spark plug socket to remove the spark plugs.
    • Inspect for wear or oil fouling. Replace with OEM or equivalent parts if necessary.
    • Torque new spark plugs to specifications (typically around 13 lb-ft).

  3. Test or Replace Ignition Coils:

    • Use a multimeter to test the primary and secondary resistance of the ignition coils.
    • If any coils are out of spec, replace all coils for uniformity.
Step 2: Fuel System Repair

  1. Check Fuel Pressure:

    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition key to the ON position (without starting the engine) and check the pressure.
    • Compare to specifications (typically around 55-62 psi for a Highlander).

  2. Inspect Fuel Injectors:

    • Remove the fuel rail to access the injectors.
    • Inspect for clogs or leaks.
    • Clean or replace fuel injectors as necessary.

  3. Replace Fuel Filter:

    • If the fuel filter is clogged, replace it according to the manufacturer’s recommendations.
Step 3: Compression and Vacuum Testing

  1. Compression Test:

    • Remove spark plugs and throttle body (if necessary) to access cylinders.
    • Attach the compression tester to the first cylinder and crank the engine.
    • Record the readings and repeat for all cylinders.
    • Compare values; if any cylinder is significantly lower, further investigation is needed.

  2. Vacuum Leak Test:

    • If misfire persists, use a smoke machine to find any vacuum leaks.
    • Repair any leaks found in hoses or intake manifold gaskets.

Final Steps

  • Clear DTCs:

    • After repairs, clear the DTCs using the OBD-II scanner.
    • Take the vehicle for a test drive to ensure the issue is resolved, monitoring for any signs of misfire.

  • Recheck Performance:

    • If misfire persists after all checks, further diagnostics may be necessary, potentially involving the ECU or more extensive engine diagnostics.

By following these steps, you should be able to identify and address the cause of the engine misfire in your 2022 Toyota Highlander effectively. Always consult the vehicle's service manual for specific details and torque specifications.