FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the rear camera malfunction in my 2020 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How can I fix the rear camera malfunction in my 2020 Toyota Highlander?

How can I fix the rear camera malfunction in my 2020 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
621 words

Problem Statement

Learn how to diagnose and fix rear camera malfunctions in your 2020 Toyota Highlander with step-by-step instructions and required tools.

Affected Component
rear camera
Estimated Time
2-3 hours

Symptoms

  • •Camera Not Displaying
  • •Error Message
  • •Poor Image Quality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Trim removal tools
  • •Torque wrench (if needed for reassembly)
  • •Electrical contact cleaner
  • •Clean cloth

Additional Information

Affected Component
rear camera
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Rear Camera Malfunction in a 2020 Toyota Highlander
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Screwdrivers (Phillips and flathead)
  • Trim removal tools
  • Torque wrench (if needed for reassembly)
  • Electrical contact cleaner
  • Clean cloth

Repair Instructions

Step 1: Gather Tools and Prepare the Vehicle
  • Ensure the vehicle is parked on a flat surface and turned off. Remove the keys from the ignition to prevent accidental starting.
Step 2: Access the Rear Camera

  1. Remove the Trim Panel:

    • Use trim removal tools to carefully pry off the rear hatch trim panel where the camera is located.
    • Remove any screws securing the panel (if applicable) using a screwdriver.

  2. Disconnect the Camera:

    • Locate the camera module on the rear hatch.
    • Disconnect the wiring harness carefully by pressing the release tab and pulling the connector apart.
Step 3: Inspect the Camera and Wiring

  1. Check the Camera:

    • Inspect the camera lens for dirt, moisture, or damage. Clean the lens with a cloth if dirty.
    • If the camera appears damaged, it will need to be replaced.

  2. Test Wiring for Continuity:

    • Use a multimeter to check continuity in the wiring harness. Place one probe on the camera connector side and the other on the vehicle side.
    • If there is no continuity, trace the wiring for damage and repair or replace as necessary.
Step 4: Test the Camera Functionality
  1. Re-connect the camera (if it appears undamaged) and turn on the vehicle.
  2. Shift into Reverse:
    • Check if the camera feed now displays correctly on the infotainment system.
Step 5: Replace the Camera (if necessary)

  1. Remove the Old Camera:

    • If the camera is faulty, unscrew the mounting screws (if applicable) and remove the camera from its housing.

  2. Install New Camera:

    • Install the new camera in the reverse order of removal. Secure it with screws and ensure all connectors are firmly seated.
Step 6: Reassemble the Trim Panel
  1. Reattach the Trim:
    • Snap the trim panel back into place, ensuring all clips are secure. Replace any screws if removed.
Step 7: Final Testing
  1. Turn on the Ignition:
    • Start the vehicle and shift into reverse to test the rear camera again.
  2. Check for Error Codes:
    • Use the OBD-II scanner again to confirm no new error codes have appeared.

Conclusion

If all steps have been completed and the rear camera is still malfunctioning, there may be an issue with the infotainment system or other electronic components, and further diagnostics may be required. Consider consulting the dealership or a specialized technician for advanced troubleshooting.