FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the oil leaks commonly reported in the 2020 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How can I fix the oil leaks commonly reported in the 2020 Toyota Highlander?

How can I fix the oil leaks commonly reported in the 2020 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
3-5 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
5 min read
822 words

Problem Statement

A comprehensive guide on diagnosing and repairing oil leaks in the 2020 Toyota Highlander, including symptoms, diagnostic steps, and repair instructions.

Affected Component
gaskets, seals, oil pans
Estimated Time
3-5 hours

Symptoms

  • •Puddles or Spots
  • •Oil Level Drops
  • •Burning Oil Smell
  • •Engine Warning Light
  • •Oil Stains

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Clean cloth
  • •Oil dipstick
  • •Oil pressure gauge
  • •Engine oil dye
  • •UV light
  • •Socket set
  • •Torque wrench
  • •Gasket scraper
  • •New gasket
  • •Engine oil
  • •Oil filter wrench
  • •New oil filter
  • •Jack and jack stands
  • •Sealant
  • •Crankshaft seal puller

Additional Information

Affected Component
gaskets, seals, oil pans
Estimated Time
3-5 hours
Difficulty
medium
Severity
medium
Tools Required
16 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Oil Leaks in the 2020 Toyota Highlander

The 2020 Toyota Highlander, part of the fourth generation, may experience oil leaks due to various reasons, such as faulty gaskets, seals, or oil pans. Below is a detailed guide on diagnosing and repairing oil leaks in this vehicle.

Step 1: Visual Inspection
  • Tools Required: Flashlight, clean cloth.
  • Procedure:
    1. Park the vehicle on a level surface and turn off the engine.
    2. Use a flashlight to inspect the engine bay for signs of oil.
    3. Check the oil filter, oil pan, valve cover gaskets, and any visible seals for leaks.
    4. Wipe areas with a clean cloth to identify the source of the leak.
Step 2: Check Oil Level
  • Tools Required: Oil dipstick.
  • Procedure:
    1. Pull out the oil dipstick and wipe it clean.
    2. Reinsert and remove the dipstick again to check the oil level.
    3. If the oil level is low, it indicates a leak or consumption issue.
Step 3: Pressure Test
  • Tools Required: Oil pressure gauge.
  • Procedure:
    1. Connect an oil pressure gauge to the oil pressure port.
    2. Start the engine and observe the oil pressure reading.
    3. Low pressure may indicate a leak or pump failure.
Step 4: Engine Running Inspection
  • Tools Required: Engine oil dye, UV light (optional).
  • Procedure:
    1. Add oil dye to the engine oil.
    2. Run the engine for about 15-20 minutes.
    3. Use a UV light to check for glowing dye around potential leak areas.
Common Leak Sources
  • Valve cover gasket
  • Oil filter
  • Oil pan gasket
  • Front and rear crankshaft seals
Repair Instructions
Repairing Valve Cover Gasket Leak
  1. Tools Required: Socket set, torque wrench, gasket scraper, new gasket, engine oil.
  2. Procedure:
    1. Disconnect the negative battery terminal.
    2. Remove any engine covers or components obstructing access to the valve cover.
    3. Unbolt the valve cover using the socket set.
    4. Carefully lift the valve cover off, taking care not to damage any components.
    5. Remove the old gasket using a gasket scraper and clean the mating surfaces.
    6. Apply a thin layer of engine oil on the new gasket and install it.
    7. Reinstall the valve cover and torque the bolts to the manufacturer’s specifications.
    8. Reconnect any components and the battery terminal.
Repairing Oil Filter Leak
  1. Tools Required: Oil filter wrench, new oil filter, clean cloth, engine oil.
  2. Procedure:
    1. Ensure the engine is cool, then place a drain pan under the oil filter.
    2. Use the oil filter wrench to remove the old oil filter.
    3. Before installing the new filter, apply a small amount of new engine oil to the gasket of the new filter.
    4. Install the new filter hand-tight, then tighten slightly more (about 3/4 turn).
    5. Start the engine and check for leaks around the filter.
Repairing Oil Pan Gasket Leak
  1. Tools Required: Jack and jack stands, socket set, gasket scraper, new gasket, sealant (if required).
  2. Procedure:
    1. Safely elevate the vehicle using a jack and jack stands.
    2. Drain the engine oil and remove the oil pan bolts.
    3. Carefully lower the oil pan and remove the old gasket.
    4. Clean the oil pan mating surface and the engine block.
    5. Install the new gasket (and sealant if required) and reposition the oil pan.
    6. Torque the oil pan bolts to specifications in a criss-cross pattern.
    7. Refill engine oil and check for leaks after starting the engine.
Repairing Crankshaft Seal Leak
  1. Tools Required: Socket set, crankshaft seal puller, new seal, sealant (if required).
  2. Procedure:
    1. Remove the transmission or components obstructing access to the crankshaft seal.
    2. Use a crankshaft seal puller to remove the old seal.
    3. Clean the sealing surface and apply sealant if recommended.
    4. Install the new crankshaft seal using a seal driver or a suitable tool.
    5. Reassemble any components removed and check for leaks after starting the engine.
Final Steps
  1. Check Oil Level: After completing repairs, check the oil level and top off as necessary.
  2. Test Drive: Take the vehicle for a short drive and re-check for any leaks.
  3. Monitor: Regularly check the oil levels and inspect for leaks to ensure the repairs are effective.

By following these steps, you should be able to diagnose and repair oil leaks in your 2020 Toyota Highlander effectively. Always refer to the manufacturer’s service manual for specific torque specifications and procedures.