how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

306 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide for quick and easy maintenance light reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues present
•No other warning lights illuminated

Diagnostic Steps

1
Turn the ignition key to the 'OFF' position.
2
Press and hold the 'ODO/TRIP' button on the instrument panel.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'ODO/TRIP' button until the maintenance light blinks and then turns off.
5
Release the 'ODO/TRIP' button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'OFF' position.
2
Press and hold the 'ODO/TRIP' button on the instrument panel.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'ODO/TRIP' button until the maintenance light blinks and then turns off.
5
Release the 'ODO/TRIP' button.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is in a safe location and the engine is off.

2. Accessing the Maintenance Light Reset

Sit in the driver's seat and make sure all doors are closed.
Locate the "ODO/TRIP" button on the instrument cluster.

3. Resetting the Maintenance Light

Turn the ignition key to the "OFF" position.
Press and hold the "ODO/TRIP" button.
While holding the button, turn the ignition key to the "ON" position (do not start the engine).
Watch the maintenance light; it should blink and then turn off after a few seconds.
Release the "ODO/TRIP" button.