how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

348 words

Problem Statement

Learn how to reset the maintenance light on a 2014-2019 Toyota Highlander. Step-by-step guide to ensure your dashboard is clear after servicing.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and parked securely before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other performance issues are typically associated with the light being on
•Light remains on after routine maintenance service

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Power' button without pressing the brake pedal to enter the 'ON' mode.
3
Locate the odometer button on the instrument cluster.
4
Press and hold the odometer button until the odometer display resets.
5
Continue to hold the odometer button until the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Power' button without pressing the brake pedal to enter the 'ON' mode.
3
Locate the odometer button on the instrument cluster.
4
Press and hold the odometer button until the odometer display resets.
5
Continue to hold the odometer button until the maintenance light turns off.

Solution

1. Preparation

Gather necessary tools: None required for this reset.
Ensure the vehicle is parked and in a safe location.

2. Power On the Vehicle

Sit in the driver's seat and close all doors.
Without pressing the brake pedal, press the "Power" button to turn the vehicle to the "ON" position.

3. Reset the Odometer

Find the odometer button located on the instrument cluster.
Press and hold the odometer button until the odometer display resets to zero.
Continue holding the button until the maintenance light turns off (this may take a few seconds).

4. Confirm Reset

Release the odometer button.
Turn the vehicle off and then back on to confirm that the maintenance light is no longer illuminated.