FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
356 words

Problem Statement

Learn how to reset the maintenance light on a 2014-2019 Toyota Highlander. Step-by-step guide to ensure your vehicle's maintenance light is off.

Affected Component
Electrical
Estimated Time
less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and the engine is off during the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Oil change or service reminder displayed
  • •No issues with vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this process.
  • Ensure the vehicle is parked safely with the engine off.
2. Reset the Maintenance Light
  1. Sit inside the vehicle and close all doors.
  2. Turn the ignition to the "OFF" position.
  3. Locate the "Odometer" button on the instrument panel; this may also be labeled as "Trip" or similar.
  4. Press and hold the "Odometer" button.
  5. While holding the button, turn the ignition switch to the "ON" position (do not start the engine).
  6. Continue to hold the "Odometer" button until the maintenance light blinks and then turns off, which indicates that the reset has been successful.
  7. Release the "Odometer" button.
  8. Turn the ignition back to the "OFF" position and then start the vehicle to confirm the maintenance light is off.