how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

383 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Quick and easy instructions for maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure position to prevent unintended movement during the procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notifications for oil change or service due
•No other engine-related warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Press the odometer button until the trip A display is shown on the dashboard.
3
Turn the ignition switch to the 'OFF' position.
4
While holding the odometer button, turn the ignition switch back to the 'ON' position.
5
Continue to hold the odometer button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Press the odometer button until the trip A display is shown on the dashboard.
3
Turn the ignition switch to the 'OFF' position.
4
While holding the odometer button, turn the ignition switch back to the 'ON' position.
5
Continue to hold the odometer button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Gather necessary tools: none required for this reset.

2. Resetting the Maintenance Light

Turn on the Ignition
- Insert the key or press the start button to turn the ignition to the "ON" position without starting the engine.
Display Trip A
- Locate the odometer button on the instrument panel.
- Press the button until the trip A odometer is displayed.
Turn Off the Ignition
- Turn the ignition switch to the "OFF" position.
Hold the Odometer Button
- Keep the odometer button pressed down.
Turn on the Ignition Again
- While holding the odometer button, turn the ignition switch back to the "ON" position.
Wait for the Reset
- Continue to hold the odometer button until the maintenance light blinks and then turns off.