FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
377 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing this reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard.
  • •Possible notifications regarding oil changes or service reminders.
  • •No changes in the vehicle's performance or operation.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • No specific tools are required for this reset.
  • Ensure the vehicle is parked safely with the ignition off.
2. Reset the Maintenance Light
  1. Turn Ignition On:
    • Insert the key and turn the ignition to the "ON" position without starting the engine.
  2. Set Trip Meter:
    • Check that the trip meter is set to "Trip A". If not, press the trip button until it displays "Trip A".
  3. Turn Off Ignition:
    • Turn the ignition switch off completely.
  4. Reset Procedure:
    • Press and hold the trip meter reset button.
    • While holding the button, turn the ignition switch back to the "ON" position.
  5. Complete the Reset:
    • Keep holding the trip meter reset button until the maintenance light flashes and then turns off. This usually takes about 10 seconds.