how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' with the engine off before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle runs normally without performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Locate the trip meter reset button on the dashboard, usually found near the odometer display.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Press and hold the trip meter reset button until the odometer displays '000000'.
5
Release the button and turn the ignition off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Locate the trip meter reset button on the dashboard, usually found near the odometer display.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Press and hold the trip meter reset button until the odometer displays '000000'.
5
Release the button and turn the ignition off.

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Access the Maintenance Reset Function

Turn the ignition key to the "ON" position without starting the engine.
Press and hold the trip meter reset button located on the dashboard.

3. Reset the Maintenance Light

Keep the trip meter reset button pressed until the odometer reading changes to "000000".
Release the button once the reset is completed.
Turn the ignition off.

4. Confirm the Reset

Turn the ignition back to the "ON" position.
Check that the maintenance light is no longer illuminated.