how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this simple step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No changes in vehicle performance or functionality

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the 'Trip' button on the instrument panel.
3
Press and hold the 'Trip' button until the trip meter displays '000000.'
4
Turn the ignition switch OFF and then back ON while continuing to hold the 'Trip' button.
5
Release the 'Trip' button when the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the 'Trip' button on the instrument panel.
3
Press and hold the 'Trip' button until the trip meter displays '000000.'
4
Turn the ignition switch OFF and then back ON while continuing to hold the 'Trip' button.
5
Release the 'Trip' button when the maintenance light resets.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked safely with the engine off.

2. Set the Vehicle to "ON" Position

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal to enter the "ON" position.

3. Reset the Trip Meter

Locate the "Trip" button on the dashboard, usually near the speedometer.
Press and hold the "Trip" button until the trip meter shows "000000."

4. Turn Off and On the Ignition

Turn the ignition switch to the OFF position.
Immediately turn the ignition switch back to the "ON" position while still holding the "Trip" button.

5. Complete the Reset

Once the maintenance light blinks and then goes out, release the "Trip" button.
Verify that the maintenance light has been reset successfully.