FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
351 words

Problem Statement

Learn how to reset the maintenance light on a 2014-2019 Toyota Highlander. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service due
  • •No change in vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the engine is off.
  • Gather necessary tools: None required for this process.
2. Resetting the Maintenance Light
  1. Turn Off Ignition: Ensure the ignition is completely off.
  2. Press and Hold Odometer Reset Button: Locate the odometer reset button on the instrument panel and press it.
  3. Turn Ignition to ON: While still holding the odometer reset button, turn the ignition key to the "ON" position without starting the engine.
  4. Wait for Light to Reset: Keep holding the odometer reset button until the maintenance light blinks and then goes off. This may take about 10 seconds.
  5. Release the Button: Once the light is off, release the odometer reset button.
  6. Turn Off Ignition: Turn the ignition switch back to the "OFF" position to complete the reset process.