how to reset the maintenance light on Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2014-2019) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and turned off before attempting to reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Dashboard warning message indicating maintenance is due
•No change in vehicle performance
•Service reminder displayed

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Navigate to the 'Settings' menu on the multi-information display using the steering wheel controls.
3
Select 'Maintenance Reset' or 'Oil Maintenance' from the menu options.
4
Confirm the reset process when prompted on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for resetting

Parts Required

•None required for resetting

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary items: car keys and, if applicable, the owner's manual for reference.
Ensure the vehicle is parked on a flat surface and in the "ON" position.

2. Access the Multi-Information Display

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Locate the "Menu" button on the steering wheel.
Press the "Menu" button to access the multi-information display.

3. Navigate to Maintenance Settings

Use the arrow buttons on the steering wheel to scroll through the options.
Find and select "Settings."
Scroll down to "Maintenance" or "Oil Maintenance" and select it.

4. Reset the Maintenance Light

Once in the maintenance settings, look for the option to reset the maintenance light.
Select "Reset" or "Confirm" when prompted.
A confirmation message will appear; confirm the reset process.

5. Verify Reset

Turn the ignition off and then back on.
Check to ensure the maintenance light is no longer illuminated.