FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
353 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2014-2019) with this simple step-by-step guide. Quick and easy process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and on a flat surface while performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other warning lights are present
  • •Vehicle runs normally post-maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for resetting the maintenance light.

Parts Required

  • •None required for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this process.
  • Ensure the vehicle is parked on a level surface with the ignition off.
2. Resetting the Maintenance Light

  1. Access the Odometer/Trip Button:

    • Locate the "Odometer/Trip" button on the instrument cluster.

  2. Turn Off the Ignition:

    • Make sure the vehicle's ignition is in the "OFF" position.

  3. Press and Hold the Odometer/Trip Button:

    • Press and hold the button down.

  4. Turn the Ignition ON:

    • While holding the "Odometer/Trip" button, turn the ignition key to the "ON" position (do not start the engine).

  5. Wait for the Maintenance Light:

    • Keep holding the button until the maintenance light blinks and eventually turns off, usually within 10 seconds.

  6. Release the Odometer/Trip Button:

    • Once the light is off, release the button.