how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)?

Toyota Highlander Third Generation (2014-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Quick and easy instructions for a hassle-free reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the engine is off during the reset process.

Symptoms

•Maintenance light is illuminated on the dashboard
•Alerts or notifications in the vehicle's multi-information display
•Possible confusion regarding upcoming maintenance intervals

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Press the 'ODO/TRIP' button until the odometer reading is displayed.
3
Turn the ignition switch off.
4
While holding the 'ODO/TRIP' button, turn the ignition switch back to the 'ON' position.
5
Continue holding the button until the maintenance light resets (usually around 10 seconds).
6
Release the 'ODO/TRIP' button and verify the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Press the 'ODO/TRIP' button until the odometer reading is displayed.
3
Turn the ignition switch off.
4
While holding the 'ODO/TRIP' button, turn the ignition switch back to the 'ON' position.
5
Continue holding the button until the maintenance light resets (usually around 10 seconds).
6
Release the 'ODO/TRIP' button and verify the maintenance light is off.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked safely and the engine is off.

2. Accessing the Maintenance Light Reset Function

Turn the Ignition to the ON Position
- Without starting the engine, turn the key or press the start button to the "ON" position.
Display the Odometer
- Press the "ODO/TRIP" button on the dashboard until the odometer reading is shown.

3. Resetting the Maintenance Light

Turn the Ignition Off
- With the odometer displayed, turn the ignition switch off.
Hold the ODO/TRIP Button
- While holding the "ODO/TRIP" button, turn the ignition switch back to the "ON" position.
Monitor the Reset Process
- Keep the button pressed until the maintenance light goes off (approximately 10 seconds).
Release the Button
- After the light resets, release the "ODO/TRIP" button.