FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
370 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide to clear the reminder after maintenance.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •Engine running smoothly but light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • None required for this procedure.
  • Ensure the vehicle is parked on a level surface and the ignition is turned off.
2. Reset Maintenance Light
  1. Press and Hold the Trip Meter Reset Button: Locate the trip meter reset button on the instrument cluster. Press and hold this button.
  2. Turn Ignition to ON: With the button held, turn the ignition key to the "ON" position without starting the engine. The dashboard lights should illuminate.
  3. Wait for the Light to Blink: Keep holding the trip meter reset button until the maintenance light starts to blink, and then it should turn off.
  4. Release the Button: Once the maintenance light is off, release the trip meter reset button.
  5. Turn Ignition Off: Turn the ignition key back to the "OFF" position to complete the reset process.