how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)?

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

400 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•None applicable for this procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle owner recently performed maintenance (oil change, tire rotation, etc.)
•Driver is uncertain about the reset procedure

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'ODO/TRIP' button on the instrument panel.
3
Press and hold the 'ODO/TRIP' button until the display shows the total mileage.
4
While holding the 'ODO/TRIP' button, turn the ignition switch to the 'OFF' position.
5
Turn the ignition switch back to the 'ON' position while still holding the 'ODO/TRIP' button.
6
Continue to hold the button until the maintenance light resets (the light should turn off).

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'ODO/TRIP' button on the instrument panel.
3
Press and hold the 'ODO/TRIP' button until the display shows the total mileage.
4
While holding the 'ODO/TRIP' button, turn the ignition switch to the 'OFF' position.
5
Turn the ignition switch back to the 'ON' position while still holding the 'ODO/TRIP' button.
6
Continue to hold the button until the maintenance light resets (the light should turn off).

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and in "Park" mode.
Gather necessary tools: none required for this procedure.

2. Ignition Position

Turn the ignition switch to the "ON" position without starting the engine.
Ensure all electrical accessories are off to prevent battery drain.

3. Reset Procedure

Locate the "ODO/TRIP" button on the dashboard.
Press and hold the "ODO/TRIP" button until the odometer displays the total mileage.
While continuing to hold the button, turn the ignition switch to the "OFF" position.
Turn the ignition switch back to the "ON" position while still holding the "ODO/TRIP" button.
Keep holding the button until the maintenance light resets and turns off.

4. Finalization

Release the "ODO/TRIP" button after the light has turned off.
Turn the ignition switch to the "OFF" position and then start the vehicle to ensure the maintenance light remains off.