FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
390 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'P' (Park) mode and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible reminders for oil change or service due
  • •Vehicle may display 'Maintenance Required' message

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this reset procedure.

Parts Required

  • •None required for the reset.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary items: vehicle keys and a clean work area.
  • Ensure the vehicle is parked on a level surface with the ignition in the "OFF" position.
2. Reset the Maintenance Light

  1. Press and Hold the Trip Meter Reset Button

    • Locate the trip meter reset button on the instrument panel.
    • Press and hold it down firmly.

  2. Turn Ignition to "ON" Position

    • Without starting the engine, turn the ignition key to the "ON" position.
    • Ensure all dashboard lights illuminate, but do not crank the engine.

  3. Wait for the Light to Blink

    • Keep holding the trip meter reset button.
    • Observe the maintenance light; it should blink and then turn off after a few seconds.

  4. Release the Button and Turn Off Ignition

    • Release the trip meter reset button.
    • Turn the ignition key back to the "OFF" position.

  5. Verify Reset

    • Restart the vehicle and confirm that the maintenance light is no longer illuminated.