FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
381 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide to clear maintenance reminders after service.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light remains illuminated after service
  • •Dashboard notifications indicating maintenance is due
  • •Inability to clear maintenance reminders through normal driving

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for the reset procedure.

Parts Required

  • •None.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked safely and the ignition is off.
2. Resetting the Maintenance Light

  1. Turn Ignition On

    • Turn the ignition key to the "ON" position (do not start the engine).

  2. Set Odometer to Trip A

    • Press the odometer button until "Trip A" is displayed on the dashboard.

  3. Turn Off Ignition

    • Turn the ignition switch off completely.

  4. Press and Hold Trip Reset Button

    • Locate the trip reset button on the instrument cluster and press and hold it.

  5. Turn Ignition On Again

    • While still holding the trip reset button, turn the key back to the "ON" position.

  6. Release the Trip Reset Button

    • Continue to hold the button until the maintenance light begins to blink and then turns off. Release the button.