how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)?

Toyota Highlander Third Generation (2014-2019)

Error Codes

15 minutes

Time

easy

Difficulty

low

Severity

2 min read

385 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide for a quick and easy reset after maintenance.

Affected Component

Electrical

Estimated Time

15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and parked before attempting to reset the maintenance light

Symptoms

•Maintenance light illuminated on the dashboard
•No change in performance or operation of the vehicle
•Reminder for oil change or scheduled maintenance still displayed

Diagnostic Steps

1
Confirm that the maintenance has been completed (e.g., oil change, filter replacement)
2
Gather the vehicle's keys and ensure the vehicle is in a safe area
3
Sit in the driver's seat and close all doors

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is turned off.
Have the keys ready; you will need them for the ignition.

2. Turn on the Ignition

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine. This is the second position on the ignition switch.

3. Access the Odometer/Trip Meter

Locate the odometer button on the dashboard. This may also serve as the trip meter reset button.
Press the button until the trip meter is displayed (not the odometer).

4. Reset the Maintenance Light

While the trip meter is displayed, turn the ignition off.
Press and hold the odometer/trip meter reset button.
Turn the ignition back to the "ON" position while still holding the button.
Continue holding the button until the maintenance light blinks and then turns off, usually after about 10 seconds.

5. Finalize the Reset

Release the odometer/trip meter reset button.
Turn the ignition off completely and then start the vehicle to ensure the maintenance light is no longer illuminated.