FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
less than 5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
359 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2014-2019) with this simple step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
less than 5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or scheduled maintenance displayed
  • •Vehicle may have completed its service interval

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ensure the vehicle is parked on a level surface and the ignition is off.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Reset the Maintenance Light
  1. Locate the Odometer Reset Button:

    • Find the button on the instrument cluster, typically near the speedometer.
  2. Press and Hold:

    • Press and hold the odometer reset button.
  3. Turn the Ignition On:

    • Turn the ignition key to the "On" position or press the start button twice without pressing the brake pedal.
  4. Monitor the Maintenance Light:

    • Keep holding the odometer reset button until the maintenance light blinks and then turns off (usually takes about 10 seconds).
  5. Release the Button:

    • Release the odometer reset button and verify that the maintenance light is no longer illuminated.