FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
371 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the ignition is off before beginning the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications about upcoming maintenance
  • •Vehicle maintenance completed (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure that the vehicle is parked on a level surface.
  • Gather necessary tools: none required for this procedure.
2. Reset the Maintenance Light
  1. Turn Off the Vehicle: Turn the ignition key to the "OFF" position.
  2. Press and Hold the ODO/TRIP Button: Locate the ODO/TRIP button on the instrument panel and press it down.
  3. Turn Ignition to ON: While still holding the ODO/TRIP button, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for the Light to Reset: Continue holding the button until the maintenance light blinks and then goes off (approximately 10 seconds).
  5. Release the Button: Once the maintenance light is off, release the ODO/TRIP button.
  6. Verify Reset: Turn off the ignition completely, then start the engine to ensure the maintenance light has been reset successfully.